by pdflow_editor | Sep 26, 2023 | Bolting System, Pump for Tensioners
HPUTP-1 Topside Bolt Tensioner & Hydraulic Nut Pump 1,500 BAR (21,750 PSI) Standard flow tension pump. Corrosion resistant frame works well for applications near salt water. Standard flow ideal for land based (topside) tension applications where the required power...
by pdflow_editor | Sep 26, 2023 | Bolting System, Pump for Tensioners
PE8 High Pressure Electric Pump 1,500 BAR (21,750 PSI) The PE8 is a very high pressure pump that incorporates proven design for reliable operation. It is based on proven pump design for reliability in rugged bolt tensioning applications. Quality means Lower Life-Cycle...
by pdflow_editor | Mar 31, 2023 | Turbine Bypass Valves
The VBSE is a steam conditioning valve used for steam throttling and desuperheating through spray water injection, directly at the outlet. Used for start-ups and load rejection, they bypass the steam to various reheat lines until the steam temperature matches the...
by pdflow_editor | Mar 31, 2023 | Turbine Bypass Valves
Turbine bypass stop valve The IMI CCI VS Turbine Bypass Stop Valve is used in the harsh environment of modern fossil-fuelled power plants when a separate stop valve is used upstream of the HP and/or LP turbine bypass valves, or whenever a tight shut off valve is...
by pdflow_editor | Mar 28, 2023 | Control Valves, IMI Critical Engineering, Turbine Bypass Valves
High Pressure (HP) bypass valves for controlled safety pressure relief systems (CSPRS) The DRE is a steam conditioning valve for steam throttling with very high pressure drop combined with in-body desuperheating through spraywater injection. Its primary application is...