PIPE FLANGE HYDRAULIC SPREADER – HFS
– You’ll never again have to resort to “hammer and chisel” methods that waste time and effort. Flange spreaders should be used in pairs to proide even spreading force.
– Standard 60° wedge is suitable for most flanges; 30° “thin” and 60° “blunt” wedges are optional.
– The HFS3A is designed for applications where total thickness of flanges and max. Spread gap is 3″ or less and flange bolts are a min. of 11/16″ dia.
– Use HFS6A if total thickness of flanges and max. Spread gap is 6″ or less, and flange bolts area min. of 13/16″ dia.
– Max working pressure 700 bar (10,000 psi)
– Uses a standard 3/8″ high flow coupler